Page 169 - REIMO - VAN CONVERSION catalogue
P. 169
SOUND INSULATION / VEHICLE INSULATION
EXCLUSIVE
®
Reimo
BEST PRICE
from 12,90
• Proven for over 30 years at Reimo
• X-trem insulator does not absorb moisture
• Extremely flexible (360°), nestles optimally to the car body
• Does not squeak, has an anti-drumming effect, resistant to most
solvents and high temperatures
• Largely harm less from abuilding biology
• Made of closed-cell foamed polyethylene
• Highly heat insulating
• Extremely light
X-trem-Isolator®* Classic Thermal conduc-
tivity value
Color: Black. Panel size approx. 1 x 2 m, price per panel: X-trem-Isolator®
Thickness 5 mm GP 6,45/1 sqm 500020 12,90
Thickness 10 mm GP 7,00/1 sqm 50015 13,99 Extremely easy to machine
Thickness 15 mm GP 10,95/1 sqm 50016 21,90 (e.g. with blade knife
Thickness 18 mm The insulator does not tear
(ideal for floor insulation) GP 13,25/1 sqm 50009 26,50 does not fray and
Thickness 20 mm GP 14,00/1 sqm 50017 27,99 does not fray)
Thickness 30 mm GP 20,25/1 sqm 50018 40,50
Rolls approx.20 mm thickness. Price per running metre. Insulation Thermal conductivity Diffusion resis- Price factor to
1,45 m roll width(approx.)GP 20,00/1 sqm 50022 29,-- materials in value, the smaller tancecoefficient PY at 40 mm
the better (W/M x K)
comparison
X-trem-Isolator® self-adhesive* X-trem isolator 0,020-0,035 vapor-tight + 4,0
- Self-adhesive even more convenient to install Polystyrene 0,025-0,040 20-300 0
Color Black. Heat resistant up to 120°, adhesive layer covered Polyuretan 0,025-0,035 30-100 + 3,0
with protective film. Panel size approx. 1 x 2 m, price per panel: Mineral fibre 0,035-0,050 1 + 0,0-2,5
Thickness 10 mm GP 17,45/1 sqm 50000 34,90 Baking cork 0,045-0,055 10-20 + 4,5-6,0
Thickness 20 mm GP 22,45/1 sqm 50001 44,90
X-trem-Isolator® Soft* For bonding, we recommend Super Spray Adhesive
50013. You need approx. 1 can/panel (2m²) - for flat
-Further development of the proven X-trem insulator bonding. Working temperature should not be below
-Slip-resistant, Odorless and significantly softer 15°C. Colors, dimensions and density of the panels may
Color: Black. Sheet size approx. 1 x 2 m, price per sheet: vary slightly due to production. We recommend a trial
Thickness 10 mm GP 9,75/1 sqm 50095 19,50 bonding (without warranty).
Thickness 20 mm GP 18,98/1 sqm 50094 37,95 *Shipping only possible by forwarding Shipping from Reimo warehouse is done by for-
X-trem-Isolator® Soft Self-adhesive agency, for panel thickness 10 - 30 mm warding agency. For smaller quantities, please
ask your dealer at what cost he can get the
freight/packing
Thickness 10 mm GP 16.98/1 sqm 50097 33,95 Stacking height 10-32 cm pallet 55,99 / 8,-- panels and, if necessary, ship them to you
Thickness 20 mm GP 24,98/1 sqm 50096 49,95 Stacking height 33-200 cm 108,99 / 8,--
Now also available as cut sets:
Insulation set for VW T5, T6 Kombi kR and lR
28 parts. 2 plates 20 mm X-Trem 50086 159,--
Extension set for VW T5, T6 panel van
kR 8 parts. 1 plate 20 mm X-Trem 500861 89,90
Mercedes-Benz Vito VS 20 station wagon long version (length 5,14 m) Left side Right side
13 parts. 2.5 plates 15 mm X-Trem 50087 219,--
Tips and tricks for vehicle insulation
Preliminary work: the curvatures of the vehicle body. 50036). Then apply the adhesive to the side the amount of pressure applied. Proceed in
Your vehicle is prepared to the Other advantages: very high insulation even wall or ceiling with a brush the same way with the wall and ceiling.
extent that you can start with the first steps at low material thicknesses (saves space Both surfaces must always be coated. Fur- When using the X-trem insulation material
for insulation. and weight), closed-pored (cannot absorb thermore, the adhesive must be applied on the floor, the X-trem insulator is not
Interior panels have been dismantled, cut- water) and also flame retardant from 15 over the entire surface so that there is no glued, but only placed under the floor panel.
outs have been made for later fixtures, such mm thickness. air space between the vehicle panel and the If you follow this advice, you will have a
as windows, electrical outlets, etc. First, cut some pieces of X-Trem insulator to X-trem insulator. This shifts the dew point cooler vehicle in the summer and a warmer
The sides of your vehicle must be clean, dry the desired size. Keep in mind that if the into the insulation and thus prevents con- one in the winter. When it comes to insula-
and free of grease. surface is difficult to access, the insulator densation. After the adhesive has been ap- tion, the principle is exceptionally: a lot
Insulation: piece including the adhesive will have to be plied and allowed to flash off, the X-trem is helps a lot !!!!
For insulation we recommend our X-trem in- attached later. placed in position More info: www.reimo.com
sulator. Advantages over other insulation Now use a brush or a fine toothed spatula Press the X-trem insulator on correctly at all
materials: it is excellent to cut with a sharp to coat the cut pieces of the X-trem isolator points, as it is not the duration of pressing
knife. It is also flexible and adapts well to with single-component adhesive (Art. No. that is decisive for the adhesive force, but
www.reimo.com 169